THE ADVANTAGE

1.Light weight design, lower energy consumption.

2.Unique hydraulic suspension on rear axle to reduce impact from working and better protection for tractor.

3.Special design on traction frame with scraper body ensure better working performance.

4.Customized control system with reliable hydraulic system, suitable for GPS and Beidou navigation.

5.High quality wear resistance parts on body areas to be with soil.

MODEL SPECIFICATION

Note:Other widths can be customized.

STRUCTURAL ANALYSIS

1.Independent development of traction structure suitable for various types of tractors.

2.High strength & wear resistance rear plate: fixed type, optimized curve design.

3.The high-strength blade with a perfect angle of entry, higher efficiency and longer life.

4.Unique tire layout and suspension hydraulic system, reduce suspension & axle impact and less impact to tractors under high speed and heavy load.

5.High-strength wear-resistant panels on both sides for longer working life.

THE ADVANTAGE

1.Light engineering design, high tensile strength tube for plough beam, low fuel consumption.

2.The wear parts treated by a special heat treatment process, Longer service life.

3.The plough post is designed as a bow structure, using high-yield material, not easily deformed.

4.Each plough body is equipped with safety bolts for overload protection.

5Optimal design of distance between furrows, it is not easy to support the pile, the turning effect is good, and the covering is tight.

MODEL SPECIFICATION

THE ADVANTAGE

1.Frame with 160mm square tube ensure high stability and long service life.

2.High under beam clearance for optimum operation.

3.Curved tines lifting up the soil without producing clods on surface.

4.Rear linkage moving up and down to get max. clearance in work

5.Disc can be as optional for better performance with tines.

6.Special heat treatment for tines and disc for better hardness and long service life.

MODEL SPECIFICATION

Note:Other working width with different tines number can be customized.

STRUCTURAL ANALYSIS

1.160mm square tube frame ensure high stability and long service life.

2.450mm cutting edge spacing design ensures good working performance.

3.Disc cutters can be adjusted quickly according to working requirement.

4.Special heat treatment for tines and disc for better hardness and long service life.

5.Overload protection bolt, entry angle adjustment.

6.Disc can be as optional for better performance with tines.

THE ADVANTAGE

1.Unique structure design and special treated frame ensure more reliable under heavy duty & high speed condition.

2.Special curved furrow surface design ensure better soil loosen condition.

3.Easy adjust and operation by hydraulic cylinder and linkage to the tractor.

4.Max. 700mm soil loosen deepth.

MODEL SPECIFICATION

STRUCTURAL ANALYSIS

1.Special design plough share point can be continuous using, the front end can be turned over after wear.

2.High tensile steel structure, more reliable and lighter.

3.Special heat treatment steel for main shaft ensure more reliable operation in heavy duty working mode.

4.Special curved furrow surface design ensure better soil loosen condition.

THE ADVANTAGE

1.High tensile steel structure ,more reliable and lighter.

2.Advanced heat treatment technology for the parts to be heavy loading especially for the furrow parts, ensure the plough stronger, better impact toughness & more wear resistance.

3.Special treated spherical plain bearing with heavy roll extrusion for all main drive shafts, much longer service life and more reliable operation.

4.Automatic hydraulic system with memory cylinders, more reliable and easy to operation.

5.Optional choice: anti-blocking type furrow support without choke by straw or plastic film.

6.Use separate auxiliary furrow and designed with safety shear bolt for overload protection.

MODEL SPECIFICATION

Note:Slat type option: S type/normal slat; F type/new anti-chocking slat.

STRUCTURAL ANALYSIS

1.The distance between the reversible center and the rear axle of the tractor can be increased or reduced by rotating the plough head.

2.Good overloading protection by the safety shear bolt on main & auxiliary furrow.

3.Safety locking pins in two places, more safety after working mode change.

4.Adjusting the height of tractor traction point more accurately and conveniently by adjusting screw rod.

5.Easy to adjust the each furrow working width by automatic adjustment with hydraulic system or semiautomatic adjustment with unique design turnbuckle.

6.Anti-blocking type furrow support without choke by straw or plastic film, higher working efficiency and lower energy consumption.

7.Special treated spherical plain bearing with heavy roll extrusion for all main drive shafts, much longer service life and more reliable operation.

8.Under the ridge: used to adjust the pull rod for adjusting furrow working width. On the ridge: used to adjust the distance between the tractor and the edge of the furrow.The special turnbuckle can be replaced by hydraulic cylinder for better adjust performance in driver cabinet.

9.Adjust the angle of the plough main beam by using stop bolts on both sides.

10.Hydraulic Mechanical depth Adjustment device by using Throttle Valve system.

11.High tensile steel structure, more reliable and lighter.

CORE COMPONENTS

1.4.The front and rear tires can be automatically changed the moving direction along with the change of width per furrow, which will increase much working efficiency in situations where the width of furrow operation needs to be adjusted frequently.

2.All rotating joints are sealed with high quality sealing parts and imported maintenance-free bearings for life-long lubricationfree maintenance.

3.Easy to adjust the each furrow working width by automatic adjustment with hydraulic system or semiautomatic adjustment with unique design turnbuckle.

Special treated spherical plain bearing with heavy roll extrusion for all main drive shafts, much longer service life and more reliable operation.

The height of the traction point is adjusted by adjusting thread rod, which make stepless and more efficient adjustment.

Reversible plough beam welded with special high tensile plate to ensure higher strength and better stability during working mode change.

The newly designed reversible arm joint with special material : higher strength and longer working life than that design by using casting.

THE ADVANTAGE

1.Special engineering design: lighter, reliable, low fuel consumption.

2.Unique hydraulic suspension on rear axle to reduce impact from working and better protection for tractor.

3.Customized control system with reliable hydraulic system, suitable for GPS and Beidou navigation.

4.High quality wear resistance parts on body areas to be with soil.

5.Working width: 3.0M to 4.5M.

6.Bottom traction and suspension traction are optional, and the bottom traction can be

customized according to the specified tractor.

7.The control output is adapted to Beidou or GPS satellite receiver.

MODEL SPECIFICATION

Note:Scraper hydraulic control system: Optimized external independent hydraulic unit or the hydraulic output from tractor.

STRUCTURAL ANALYSIS

1.Using high-load radial wide tires and heavy truck wheels, the wheels are equipped with high-precision bearings and imported grease. The operation is stable and reliable.

2.The curved design of the board reduces the resistance of shoveling, and the efficiency of soil entry is higher. Bulldozing is more flexible and prevents soil hanging.

3.The 25T heavy duty ejection cylinder with special connection type to effe- ctively prevent the cylinder from sma-shing during operation.

4.The high-strength blade with a perfect angle of entry, higher efficiency and longer life.

5.Unique tire layout and suspension hydraulic system, reduce suspen- sion & axle impact and less impact to tractors under high speed and heavy load.

6.Independent development of traction structure suitable for various types of tractors.

7.High-strength wear-resistant panels on both sides for longer working life.

8.The bulldozing board is equipped with a protective board. Prevent abrasion of the bottom under long- term work. The protection board can be replaced to ensure a longer service life of the bulldozing board.

CORE COMPONENTS

Special design struct for lubrication, anti-dust and leakage free.

Specially designed non-welded traction structure, Smooth steering even under high load.

Three sets of rollers with special design: without lubrication after working, Ejector working smooth, avoid ejection dead moving.

The hydraulic cylinder is installed in the box for better protection.

Full application soil range from light to heavy with or without stone.

THE ADVANTAGE

1.High tensile steel structure, more reliable and lighter.

2.Advanced heat treatment technology for the parts to be heavy loading especially for the

furrow parts, ensure the plough stronger, better impact toughness & more wear resistance.

3.Auto reset system for main furrow, better overloading protection by safety shear bolt on

auxiliary furrow.

4.Optional choice: new technology furrow support without choke by straw or plastic film.

5.Unique reversible parts including high performance hydraulic system imported from Europe.

6.Separated auxiliary furrow and design with safety shear bolt for overload protection.

MODEL SPECIFICATION

STRUCTURAL ANALYSIS

1.European imported double-acting steering cylinder and hydraulic control system.

2.Good angle of entry and excellent wear resistance due to the share points & wings with special material & design and 15mm extra wear layer.

3.The slats are specially hardened for longer service life and better impact toughness.

4.Integral reversible part for reliable operation.

5.Good overloading protection by the safety shear bolt on main & auxiliary furrow.

6.|-beam welded with high-strength plates, stronger than castings and longer working life.

7.High tensile steel structure, more reliable and lighter.

8.Extra wear surface and the better cockroach effect due to the auxiliary furrow surface.

CORE COMPONENTS

Special high-strength alloy steel

structure plough head with double-

acting steering cylinder for smooth

reversal and precise conversion.

Integrated reversible part design,

special quenched steel, no weld

seam, high strength, long life, ma-

intenance free.

Easy to change the wheel function via

locking pin for the depth limitation & tra-

nsportation dual-function wheel.

Easy to height adjustment due to indep-

endent two parts of separated auxiliary

furrow by bolt connection, safety shear

bolt applied.

Specially designed l-beams

welded by high-strength plates,

with higher strength and longer

life than castings.

Optional choice: new technology

furrow support without choke by

straw or plastic film.